BRAKE - Caliper' M/Cyl Piston & Seal Kits
The Triumph Tiger 955i (T709EN) is a dual sport motorcycle that was produced by Triumph Motorcycles between 2001 and 2006. It was the successor of the visually similar 885 cc Tiger T709 (1999–2000) which was also fuel injected but with a different engine, 855 instead of 955. It was later superseded by the Triumph Tiger 1050 in 2007.
![Tiger 955i 1999-04 [Spoke Wheel] "FRONT" Brake Caliper Seal Kit:](https://files.ekmcdn.com/squaredealsmot/images/tiger-955i-1999-04-spoke-wheel-front-brake-caliper-seal-kit--2935-p.jpg?w=150&h=150&v=1d3ac333-6fff-47ed-bdc9-2ccb742ad50c)
£10.99
Piston & Seal kits [Rebuild Kits] are also available.
![Tiger 955i 1999-04 [Spoke Wheel] "REAR" Brake Caliper Seal Kit:](https://files.ekmcdn.com/squaredealsmot/images/tiger-955i-1999-04-spoke-wheel-rear-brake-caliper-seal-kit--2936-p.jpg?w=150&h=150&v=1d3ac333-6fff-47ed-bdc9-2ccb742ad50c)
£10.99
Piston & Seal kits [Rebuild Kits] are also available.
£44.99
£44.99
£3.50
Triumph Banjo Bolt for FRONT Caliper - Titanium Steel (Double Hose)
£3.00
Banjo Bolt for FRONT Caliper - Titanium Steel (Single)
£3.00
Triumph Banjo Bolt for REAR Caliper - Titanium Steel (Single)
![Copper Washers for banjo bolts. 14mm O/D, 10mm I/D, 1.4mm Thick [4 Pack]](https://files.ekmcdn.com/squaredealsmot/images/copper-washers-for-banjo-bolts.-14mm-o-d-10mm-i-d-1.4mm-thick-4-pack--7166-1-p.jpg?w=150&h=150&v=1d3ac333-6fff-47ed-bdc9-2ccb742ad50c)
£3.99
GRANVILLE Copper Grease: Copper Anti-Seize Compound. 20g. "Copper Slip"
!["Brake Pad Pin" Cap Cover Screw 10mm [Most Nissin/Triumph Calipers] Priced Each.](https://files.ekmcdn.com/squaredealsmot/images/-brake-pad-pin-cap-cover-screw-10mm-most-nissin-triumph-calipers-priced-each.-6818-p.jpg?w=150&h=150&v=1d3ac333-6fff-47ed-bdc9-2ccb742ad50c)
![Replacement 58mm Brake Pad Retaining Pin. [Front ] Many Triumph Applications.](https://files.ekmcdn.com/squaredealsmot/images/replacement-58mm-brake-pad-retaining-pin.-front-many-triumph-applications.-4911-p.jpg?w=150&h=150&v=1d3ac333-6fff-47ed-bdc9-2ccb742ad50c)
£5.00
Replace Corroded Slider Pins With A New Hardened Steel Pin. In most cases one pin is needed for each caliper however some rear calipers require two pins. Replacement 58mm Brake Pad Retaining Pin. [Front ] Many Triumph Applications.
£2.99
Stainless Steel Brake Bleed Nipple M8x1.25: Priced Each
-6822-p.jpg?w=150&h=150&v=73CC65A2-BED2-45C5-946C-A20DA1BDBD7C)
£6.00
Stainless Steel Brake Pad Retaining Pin 58mm Triumph Front Caliper Applications. SKU: T2020084
£4.99
Quality Aftermarket Replacements For Worn And Rounded Triumph Disc Bolts.
£4.99
TRIUMPH Brake Caliper Shaft Bolt Rubber Boot T2021707
£19.99
Triumph Two Piston Caliper Support Bracket Bracket Slider Pins Stainless Steel (1 Pair)
